diff --git a/isp.txt b/isp.txt
new file mode 100644
index 0000000..f9e1e55
--- /dev/null
+++ b/isp.txt
@@ -0,0 +1,42 @@
+	 1)(2
+	 3)(4
+	 5)(6
+Reset	 7)(8
+GND	 9)(10
+	11)(12
+	13)(14
+	15)(16
+	17)(18
+MOSI	19)(20
+MISO	21)(22
+SCLK	23)(24
+	25)(26
+	27)(28
+	29)(30
+	31)(32
+	33)(34
+	35)(36
+	37)(38
+	39)(40
+
+nano /usr/local/etc/avrdude.conf
+change to:
+
+programmer
+  id    = "linuxgpio";
+  desc  = "Use the Linux sysfs interface to bitbang GPIO lines";
+  type  = "linuxgpio";
+  reset = 4;
+  sck   = 11;
+  mosi  = 10;
+  miso  = 9;
+;
+
+If everything is hooked up correctly you should now be about to communicate between the Raspberry Pi and Arduino/AVR.
+
+Time for a quick test;
+
+pi@raspberrypi avrdude-6.2/~ $ sudo avrdude -c linuxgpio -p atmega328p -v
+-c Specify the programer type
+-p Part Number. Use atmega328p for the Arduino UNO
+-v Verbose output